Skip to content
Build & Quote

Armored to perfection.

Blacked-out luxury SUV in profile, in a dark studio 01DOORS Aramid panels set behind the factory skin 02GLASS 19–22 mm laminate, rolls all the way down 03PILLARS & ROOF Covered where your package calls for it 04RUN-FLAT TIRES Composite inserts, drive on after a puncture DRAWINGBA-01 · SIDE ELEVATION PROTECTIONBR4 / NIJ IIIA FINISHFACTORY, UNCHANGED
  1. 01 DoorsAramid panels set behind the factory skin
  2. 02 Glass19–22 mm laminate, rolls all the way down
  3. 03 Pillars & roofCovered where your package calls for it
  4. 04 Run-flat tiresComposite inserts, drive on after a puncture

Discreet, superior armoring for civilians and law enforcement, finished so nobody can tell.

Invisible armor

Four layers. One factory door.

FalconForm ballistic panels

Woven ballistic panels are shaped to the door and set behind the skin, with seams overlapped so the protected area carries no gap at the edges.

FalconView ballistic glass

Multi-laminate glazing replaces the factory window, cut to the original profile so the sightlines and the drop of the glass are unchanged.

Weight

Protection that doesn't weigh you down.

Rifle-rated steel adds mass the brakes, suspension and tires feel every mile. For handgun and shotgun threats, BR4 lightweight materials keep performance where it was.

BR6 / NIJ III ballistic steel

up to 3,000 lb

800 to 3,000 lb, vehicle-specific

BR4 / NIJ IIIA ultra lightweight

up to 450 lb

180 to 450 lb, with no change to performance

Protection levels

BR4 and BR6.

See the full EN 1063 chart

Weapon illustrations by Skoll, John Colburn, and Delapouite, Game-icons.net, CC BY 3.0.

Armored Land Rover Range Rover, studio render, front three-quarter view

Land Rover Range Rover

Try the builder

See the armor on your vehicle.

Starting at$25,000

Final figures confirmed on VIN inspection. Excludes applicable taxes and freight.

Continue in the builder

Process

From first call to keys in hand.

Allow about 4 weeks for materials after your deposit, then 3 to 4 weeks to install BR4 or 8 to 10 weeks for BR6. Timelines are estimates.

The full process
  1. Step 1 · About 4 weeks

    Design & preparation

    Select your protection level and customize your build.

  2. Step 2 · 1–2 days

    Vehicle intake

    Your vehicle is transported to our certified installation facility.

  3. Step 3 · Part of install

    Precision disassembly

    The vehicle is carefully disassembled where the armor will go.

  4. Step 4 · 3–4 wk BR4 · 8–10 wk BR6

    Ballistic integration

    Your selected ballistic package is professionally installed.

  5. Step 5 · Part of install

    Reassembly & final testing

    Reassembled, road tested, water tested and inspected.

FAQ

Good questions.

All questions

Baldwin Armor offers five packages: Operative, Citadel, Phantom, Phantom+ and Phantom MAX. Starting-at prices run from $2,500 per window for Operative to $93,000 for Phantom MAX on an SUV, depending on level of protection, type of coverage and type of vehicle. Most common are the Citadel and Phantom packages at BR4 handgun and shotgun protection. Every build is quoted to the specific vehicle.

Our lightweight armor packages take 3 to 4 weeks. Higher threat protection builds take 8 to 10 weeks.

Our lightest weight ballistic protection, BR4 / NIJ IIIA, is rated for handguns up to .44 Magnum. BR6 / NIJ III ballistic steel is rated for 7.62×39 mm (AK-47), 5.56×45 (AR-15) and 7.62×51 mm NATO. We'll help you choose during consultation.

BR4 / NIJ IIIA ultra lightweight protection adds 180 to 450 pounds with no change to performance. BR6 / NIJ III ballistic steel adds 800 to 3,000 pounds, depending on the vehicle and coverage.

Armored Rolls-Royce Cullinan in a dark studio, rear three-quarter view

Nobody will know. That's the point.